AIT iTool Manual de usuario descargar pdf (Pagina 18)

LDA 1

A well proven unit, with robust aluminum-ca-

sing, that cannot be inadvertently damaged

by hot solder tips. The absorber can be

used either as a table appliance or higher

up with a tripod, to be ordered seperately

(with round base), with variable inclination

angle. Power requirement: 220/240V/18W,

air throughput: 170³/h, noise level: 40dBA,

housing: anodized aluminum, dimensions:

150x140x55mm

LDA 4

The life expectancy of the filter is about 4-6

weeks with a run time of approximately 8

hours per day. Due to the high air throughput

with minimal noise development (through the

use of 4 low noise fans), this unit is suitable

for virtually any job.

Power requirements: 220/240V 16W, air

throughput: 320³/h, noise level: 36dBA,

housing: anodized aluminum, dimensions:

260x230x55mm.

LDA 11

Useful appliance with adjustable inclination,

that fully suffices average requirements with

smaller soldering jobs. Based on the attrac-

tive price and the practical construction,

this absorber is suitable for schools, home

industry and training. The appliance comes

with its own mount or stand.

Power requirements:220/240V/18W, air

throughput:160³/h, noise level: 40dBA,

housing: anodized aluminum, dimensions:

150x140x55mm

Fume Extractors

(continued)

Part No. Ord.No.

LDA 11 8829

Part No. Ord.No.

LDA 1 9526

ZD-153

Fume extractor 60m3/h.

Power Supply: 230VAC/50Hz

Power: 23W

Noisiness: 43dB

Filter dimensions: 130x130x10mm,

3 filters in package

Dimensions: 220x270x168mm

Weight: 1,4Kg

Part No. Ord.No.

ZD-153 63002

LDS1

Desktop stand for fume extractor

LDA1, Round.

LDS 6

Desktop stand for fume extractor

LDA4

Part No. Ord.No.

LDA 4 9528

Part No. Ord.No.

LDS 1 9527

LDS 6 9529

LDF

Replacement filters for fame extrac-

tors. Life time min. 240 working

hours

Part No. Ord.No. Description

LDF 1 9525 Sada filtrov to LDA1 a LDA11 6ks

LDF 4 9530 Filter to LDA 4

ECONOMIC

Lead Free Solder Wires

1532 Series

Universal lead-free solder

Activated rosin flux

Good thermal stability in poor soldering conditions

Clear, hard residues can be left on the board

Flux Type: F-SW26

Alloy: Sn96,5Ag3Cu0,5

Flux Content: 3,3%

Melting Temperature: +217°C to +227°C

AS Series

Fluitin AS is an activated rosin cored solder wire develo-

ped for general hand soldering applications where halide

free flux has been specified.

Flux Type: F-SW32

Alloy: Sn99Ag0,3Cu0,7

Flux Content: 3,3%

Melting Temperature: +217°C to +228°C

HS10 Series

is very efficient by its high activity, which results

in quick spread of solder and electrical safe

residues.

Halide activated rosin flux with following properties:

• save soldering even at low soldering temperatures

• solid and dry residues, pin testable

• fast soldering, high spread speed

Can be used for hand and robot soldering

• high reliability

Flux Type: T Y P 1.1.2

Alloy: Sn95,5Ag3,8Cu0,7/ Sn99Cu1

Flux Content: 2,5%

Melting Temperature: +217°C

2630 Series

This solder wire is used for applications requiring

a higher activity, for components with poor sol-

derability, especially for soldering operations on

transformers, soldering on cooper cables with large dia-

meters, where a stronger flux is needed to cope with a hig

thermal capacity of the components to be soldered. It is

also used for soldering ofn nickel surfaces, critical com-

ponents and robotic soldering with short cycle times.

Flux Type: T Y P 1.1.2

Alloy: Sn95,Ag4Cu1

Flux Content: 2%

Melting Temperature: +217°C

Solder Wire SAC serie

S-Sn95,5Ag3Cu0,5 solder manufactured

in the first melt of tin and silver according

to PN EN 29453:2000 standard in continuous casting

process in air-free environment; afterwards extruded, in

order to eliminate oxide occurrence

Flux Type: TYP 1.1.3

Alloy: Sn96,5Ag3Cu0,5

Flux Content: 2%

Melting Temperature: +217°C to +219°C

Part No. Ord.No. Description

1532 Sn96,5Ag3Cu0,5 56180 0,5mm 250g

Part No. Ord.No. Description

2630 Sn95,Ag4Cu1 54322 0,5mm 100g

2630 Sn95,Ag4Cu1 56983 0,7mm 250g

Part No. Ord.No. Description

AS Sn99Ag0,3Cu0,7 56984 1mm 500g

Part No. Ord.No. Description

HS10 Sn95,5Ag3,8Cu0,7 55949 0,8mm 250g

HS10 Sn95,5Ag3,8Cu0,7 55950 0,8mm 500g

HS10 Sn95,5Ag3,8Cu0,7 55951 0,8mm 1kg

HS10 Sn95,5Ag3,8Cu0,7 53947 0,8mm 100g

HS10 Sn95,5Ag3,8Cu0,7 41359 1mm 10g

HS10 Sn95,5Ag3,8Cu0,7 52412 1mm 250g

HS10 Sn99Cu1 69529 1mm 100g

Part No. Ord.No. Description

SAC305 Sn96,5Ag3Cu0,5 57184 0,7mm 1kg

Pb free

L 17

Soldering Equipment

- in-stock product

- on order product. Prices are quoted in EUR excluding VAT and transport costs.

Solders

1 2 ... 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios

AIT iTool Manual de usuario Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) AIT iTool